space invaders deluxe help pic inside

[lojack]

hi all

finally getting started on my space invaders deluxe restore.  turned it on finally and this is what i get on the screen
https://www.dropbox.com/s/ibl51tjfjozf4en/space-invaders-problems.jpg

checked the voltages and everything is on point.  not sure where to go from here.  anyone have any suggestions?

Thanks
lojack

[iankellogg]

I would start with the PCB. The monitor looks okay. you can plug the PCB into a normal TV using composite.
http://forums.arcade-museum.com/showthread.php?t=86251

[ousoonerfan2006]

Re-seat the board, it's shaped like an "L".  You can clean the male edge connector with a pencil eraser carefully.check your voltages, and re-seat the few chips that are socketed. Should get it going, not much to go wrong with it.

[lojack]

i cleaned the edge connectors (male) before the test. i will try the chips next

[iankellogg]

http://www.outerworldarcade.com/arcade/space_invaders/space_invaders_test_rom.html
I could burn you one if you wanted to try this. If you ship it back to me I won't even charge you!