Hey guys,
I did not find a dedicated artwork section on the forums, so i hope its ok to post it here.
I have posted this on DLF, so its a straight copy paste from there ;)
I do need to add that i took the color from the scan as i dont have the Original source, so it could be that it needs to be colormatched.
anyway, here the post ;
I have had this long on the "todo list", and finally i started and finished it.
Cocktail Table Control Panels Vectorised for Reproduction By Etienne
there are two different metal control panels;
I made 2 layers, one with the ink, and the other containing the cut / mill lines.
as seen in the sample pics, there is a "028M" and a "028S" variant.
I started with the "028M"
After that i did the adjustments to that file to create "028S"
if you want them, here are the download links:
028M.pdf028S.pdf
