R-Type to PC-10 Conversion

ZeroInertia

Newbie

Offline

Posts: 4

R-Type to PC-10 Conversion

« on: February 16, 2014, 10:13:11 pm »

Need info on possibly convert my recently purchased R-Type Cab to a PC-10. Unfortunately the cab didn't come with a r-type pcb and was thinking of a pc-10 setup. My question is what is need other than a single monitor motherboard and control panel and other cosmetic items. Maybe a new wiring harness, etc?
Any input would be appreciated.
Thanks


	Logged

darkcat1

Full Member

Offline

Posts: 171

Re: R-Type to PC-10 Conversion

« Reply #1 on: July 17, 2014, 10:50:22 am »

The PC10 is non-jamma while Rtype is Jamma. you'd need to rewire the whole cab.

That said the dedicated single monitor PC10s used the same cab as Rtype...just a different color


	Logged

John's Arcade

Administrator
Hero Member

Offline

Posts: 2097

Re: R-Type to PC-10 Conversion

« Reply #2 on: July 17, 2014, 11:10:18 am »

Quote from: darkcat1 on July 17, 2014, 10:50:22 am

The PC10 is non-jamma while Rtype is Jamma. you'd need to rewire the whole cab.

That said the dedicated single monitor PC10s used the same cab as Rtype...just a different color

Dedicated PC-10s were black. The dedicated Nintendo Vs. cabs were gray.


	Logged

nintendoguy1982

Newbie

Offline

Posts: 42

Im obsessed with Nintendo Arcades

Re: R-Type to PC-10 Conversion

« Reply #3 on: October 01, 2014, 11:08:47 pm »

DONT DO IT!

dammit I've been looking for an r-type out here in San Diego


	Logged

zds76

Jr. Member

Offline

Posts: 81

Re: R-Type to PC-10 Conversion

« Reply #4 on: October 06, 2014, 10:19:29 am »

I have 2 pc10 one is a double monitor one is a single monitor. I was thinking of converting my single monitor to rtype maybe we could do a swap for parts.


	Logged

Pages: [1]

« previous next »

	Author	Topic: R-Type to PC-10 Conversion (Read 4168 times)
0 Members and 1 Guest are viewing this topic.