Thank you guys very much, I did find a great schematic on crazykong. The schematic I had was almost impossible to read. I went on Elecktronforge website and it said he was only doing select repair/ order fills since he is so backlogged. I made a temp. harness by just soldering the wires to the pins for test purposes. If I'm reading the schematic correctly the pin are pin 1 on AUX goes to Pin 24 on the Vector and this pattern goes on like this, if this doesn't seem right to guys please let me know, I did plug the board in and all I got was Solid lights on the Ply select buttons, no picture, and the only sound I get is constant beeps. Voltages are correct going into the PCB's and I already rebuilt the 6100. AR-2, and PSU. I did notice that I'm getting 10V out of the X out test point and 3v out of the Y out test point, I remember reading this should be between -2 and +2v. Is that correct? Also, does anyone know if someone may have a Tempest board set for sale, I'm going to post that also on the topic looking for parts, I wouldn't mind having a spare and it would also help me figure out what's exactly wrong with my Tempest board set. Oh and a side note, I noticed my board was missing the A1 I.C. on the AUX board, I ordered a new one and didn't know if it was a chip that needed to be programmed?
if i have a chance tonight i will take a look at the schematics.
thanks
blake
