|
mnegr454
|
 |
« on: March 29, 2016, 10:11:50 pm » |
|
Looking for a vender that carries a 924J/400V capacitor, it is c423 on the service manual. I ordered a cap kit and flyback but couldn't find this part and it's the on that is burned on the board. Any ideas what could have cause for it burn up?
|
|
|
|
|
Logged
|
|
|
|
|
mnegr454
|
|
« Reply #1 on: April 03, 2016, 09:00:44 pm » |
|
Anybody have any idea where to get this part .92uf/400v capacitor?
|
|
|
|
|
Logged
|
|
|
|
|
iankellogg
|
|
« Reply #2 on: April 05, 2016, 02:52:03 pm » |
|
any vendor is going to have it. mouser/digikey
just look for a polypropylene .92uF 400 or 630V cap
|
|
|
|
|
Logged
|
|
|
|
|
mnegr454
|
|
« Reply #3 on: April 06, 2016, 06:52:59 pm » |
|
This is all they have, both companies. Can I use this?? CAP FILM 0.91UF 3% 400VDC RADIA 0.91µF ±3% 400V Polypropylene (PP), Metallized
CAP FILM 0.91UF 5% 400v 0.91µF ±5% 400V Polypropylene
-
CAP FILM 0.91UF 5% 630VDC RADIAL 0.91µF ±5% 630V Polypropylene (PP), Metallized
-
-
630v 0.91µF ±3% this
am I looking for the wrong cap?? This is the description on the manual item#89 part no. 2329454 description capacitor 924J/400v location c423
|
|
|
|
|
Logged
|
|
|
|
|
iankellogg
|
|
« Reply #4 on: April 07, 2016, 08:01:24 am » |
|
That sounds okay to me. just make sure you get long lead, and not cut lead. If you accidentally buy cut lead you will have a hard time soldering it in.
|
|
|
|
|
Logged
|
|
|
|
|
mnegr454
|
|
« Reply #5 on: April 07, 2016, 09:54:25 pm » |
|
thanks will order some see what happens
|
|
|
|
|
Logged
|
|
|
|
|
mnegr454
|
|
« Reply #6 on: April 16, 2016, 12:06:34 am » |
|
Replaced the burned cap and added a cap kit with a new flyback but still getting a ticking sound coming from the monitor board. No glow just dead monitor ticking. Any ideas what could be wrong?
|
|
|
|
|
Logged
|
|
|
|
|
iankellogg
|
|
« Reply #7 on: April 16, 2016, 07:49:57 pm » |
|
did you ever check the HOT. it sounds like you still have a shorted HOT.
|
|
|
|
|
Logged
|
|
|
|
|
mnegr454
|
|
« Reply #8 on: April 16, 2016, 09:16:36 pm » |
|
No, do you have any? HOT PH-L9804 and cap .056uf 250v I been reading alot about 2702 and it looks like I got the wrong cap for location c423. I was going by the manual and thought 2701 and 2702 were the same but I guess not. I read a post on the 2702 and they had a cap of .056uf @250 v at c423 while the manual with 2701 has the .92uf @ 400v. This is for road burners game. I was given about 25 games and trying to read everything avalible to get this games working.
|
|
|
|
|
Logged
|
|
|
|
|
mnegr454
|
|
« Reply #9 on: April 20, 2016, 08:30:55 pm » |
|
Replaced the hot still ticking any other ideas what could be causing the ticking
|
|
|
|
|
Logged
|
|
|
|
|
iankellogg
|
|
« Reply #10 on: April 21, 2016, 03:23:11 pm » |
|
other shorts will cause ticking. Sometimes the poly caps fail, pretty much go around the board with your multimeter looking for shorts.
|
|
|
|
|
Logged
|
|
|
|
|
|
|
