John's Arcade Forum - Classic Arcade and Pinball Collecting and Restoring Discussion Forum - RETRO MAME - Nintendo Vs Forum
November 22, 2024, 07:17:24 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Welcome to the John's Arcade Forum. Glad you made it! Smiley
 
   Home   Help Search Calendar Login Register  
Pages: [1]
  Print  
Author Topic: Dig Dug - Sanyo 20EZY monitor - B+ setting?  (Read 4030 times)
0 Members and 2 Guests are viewing this topic.
bfrosty
Full Member
***
Offline Offline

Posts: 128


View Profile
« on: March 08, 2015, 05:56:11 pm »

Anyone know the B+ setting for a Sanyo 20EZY?  This is in an Atari Dig Dug Cabinet.

The current reading is +150vDC.  I know Nintendo's 20EZ is suppose to be 108vDC....just wondering what the EZY runs at.

Thanks for your help.
MK
« Last Edit: March 08, 2015, 08:28:01 pm by mkalist » Logged
bfrosty
Full Member
***
Offline Offline

Posts: 128


View Profile
« Reply #1 on: March 08, 2015, 06:13:36 pm »

I think I found my problem....

Both PIN 2 and B are showing a whopping +13vDC.  The manual says +5vDC.

Bad Power Supply?

Thanks,
MK


Logged
bfrosty
Full Member
***
Offline Offline

Posts: 128


View Profile
« Reply #2 on: March 08, 2015, 06:26:29 pm »

Here is what the screen looks like now.  +13vDC going into the board at PINS 2/B.  The edge connector looks fried.  See Photos:

Marquee Lights, Player 1/2 buttons glowing.
Current Screen:


Edge Connector:
Logged
VertexGuy
Guest
« Reply #3 on: March 08, 2015, 10:01:02 pm »

Its an ARII right?

I recently had one just spiking like that outta the blue and it did glitch the game onscreen. it would either do 4v or 13v ..
something on the ARII blew out causing that.
Try another ARII see what it does.
Logged
bfrosty
Full Member
***
Offline Offline

Posts: 128


View Profile
« Reply #4 on: March 09, 2015, 07:42:22 am »

Cool...yes....Diode R29 is fried on the ARII board.

Also, my B+ is at +150v.....shouldn't be around +108vDC?

Thanks,
MK
Logged
iankellogg
Global Moderator
Hero Member
*****
Offline Offline

Posts: 1433



View Profile
« Reply #5 on: March 09, 2015, 09:28:44 am »

it sounds like your edge connector being burnt up is causing the AR2 to ramp the voltage up too high. Consider wiring power around the edge connector. As far as the monitor goes. Work on that separately. I imagine the B+ is the same for the EZY as the EZV, but it could be closer to a wells which is around 130V. ultimately what matters is how it fills the screen as B+ can control the fill.  If the B+ gets too high the over voltage shutdown circuit should enable.
Logged

https://iankellogg.com
Cap kits, eproms, and more
bfrosty
Full Member
***
Offline Offline

Posts: 128


View Profile
« Reply #6 on: March 09, 2015, 10:27:04 am »

Thanks Ian.

Another user emailed me back on KLOV...he believes that the B+ should be at +108vDC...just like the Sanyo EZV.

That diode on the ARII is completely fried...it looks a bit melted too.  Will post pic.  Not much to that ARII board.
Logged
bfrosty
Full Member
***
Offline Offline

Posts: 128


View Profile
« Reply #7 on: March 09, 2015, 09:17:26 pm »

R30 is fried too.

So, both R29 and R30.

MK

Cool...yes....Diode R29 is fried on the ARII board.

Also, my B+ is at +150v.....shouldn't be around +108vDC?

Thanks,
MK

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Install Simple Machines Forum Valid XHTML 1.0! Valid CSS!