Zero Point

[pfunk0320]

I have a Zero Point:
http://www.arcade-museum.com/game_detail.php?game_id=10527

I found that my game is playing blind and have found that the neck board has burn marks and most likely need to be replaced.  I have been able to disconnect most of the cabling, but where the neck board plugs into the tube, I am having issues disconnecting. 

[John's Arcade]

I have a Zero Point:
http://www.arcade-museum.com/game_detail.php?game_id=10527

I found that my game is playing blind and have found that the neck board has burn marks and most likely need to be replaced.  I have been able to disconnect most of the cabling, but where the neck board plugs into the tube, I am having issues disconnecting.  

Watch my video here:

http://www.youtube.com/watch?v=YfQbdvB8GSM

I show how to remove the neck board. You just have to wiggle it off *CAREFULLY*

[pfunk0320]

What a great video!  I found that the neck board has burn marks everywhere on the board.  Any idea on a 10 pin replacement neck board.  I looked at ebay and only 2 are available and untested.

[John's Arcade]

What a great video!  I found that the neck board has burn marks everywhere on the board.  Any idea on a 10 pin replacement neck board.  I looked at ebay and only 2 are available and untested.

Yeah, ebay is gonna be your best bet. Are you sure it's bad? The burn marks could just be from a part that got too hot, the board itself might not be bad. Maybe you just need to replace the scorched parts and the traces on the back are fine.