John's Arcade Forum - Classic Arcade and Pinball Collecting and Restoring Discussion Forum - RETRO MAME - Nintendo Vs Forum
November 23, 2024, 02:51:47 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Welcome to the John's Arcade Forum. Glad you made it! Smiley
 
   Home   Help Search Calendar Login Register  
Pages: [1] 2
  Print  
Author Topic: Atari Cocktail Cab rebuild project  (Read 5265 times)
0 Members and 4 Guests are viewing this topic.
RiceCube
Newbie
*
Offline Offline

Posts: 17


View Profile
« on: August 27, 2014, 09:05:41 pm »

 I Have an Atari Cocktail table that has very little working on it. The coin-op lights up and I had sound once but it was an opening and skipped to a two second loop. I have no idea what it is or what it used to be. I have no monitor glow or glow in the tube. I have checked the power supply and I have 5v and 12v coming off it. I do not know much about the Isolation transformer and even though it looks like hell I believe it is functioning properly. I also checked all fuses through the board cleaned and checked connections and all were fine.The table is weathered and dirty but all wiring and boards are fairly clean for sitting so long. I have built my own MAME machines but this is my first authentic rebuild of a machine. I would like to keep close to original as possible besides the obvious cosmetics. It is an Atari table that is strange because I cannot find anything on the model number or serial. The board inside has a model number but I also can find nothing on it. Because I have no idea what is in it I cannot even look up the pinouts. The table had to of been altered. I have never seen the control layout before and it is different for each player. If anyone has info on this game or where to go next I would be more tan happy to take that advice. I am going to leave the model numbers if anyone wants to take a crack at this.
Table Model# 298-01
Table Serial# 1144
PCB Model# 2309

Since I can't get my pics to work right now here is a link to my Flickr page with all pics  https://www.flickr.com/photos/127263296@N03/?savedsettings=15055640641#photo15055640641
« Last Edit: August 28, 2014, 01:54:36 am by RiceCube » Logged
RiceCube
Newbie
*
Offline Offline

Posts: 17


View Profile
« Reply #1 on: August 27, 2014, 09:31:06 pm »

my photos wont work I need to use something other than flickr i guess
Logged
VertexGuy
Guest
« Reply #2 on: August 28, 2014, 01:35:16 am »

whats the button layout?
is it an asteroids?
Logged
RiceCube
Newbie
*
Offline Offline

Posts: 17


View Profile
« Reply #3 on: August 28, 2014, 01:52:53 am »

it is what I thought it was but it has analog sticks and four buttons
https://www.flickr.com/photos/127263296@N03/?savedsettings=15055640641#photo15055640641
« Last Edit: August 28, 2014, 01:55:45 am by RiceCube » Logged
RiceCube
Newbie
*
Offline Offline

Posts: 17


View Profile
« Reply #4 on: August 28, 2014, 09:05:15 pm »

Does my link not work? or is there no one that knows what my next step is?
« Last Edit: August 29, 2014, 12:42:05 am by RiceCube » Logged
VertexGuy
Guest
« Reply #5 on: August 31, 2014, 01:27:05 am »

it is what I thought it was but it has analog sticks and four buttons
https://www.flickr.com/photos/127263296@N03/?savedsettings=15055640641#photo15055640641

It looks like somebody replaced the fire button on the asteroids with a stick, then added 2 more buttons.
Logged
RiceCube
Newbie
*
Offline Offline

Posts: 17


View Profile
« Reply #6 on: August 31, 2014, 10:10:57 am »

That is what I thought. But does anyone know if the plug and outlet leading to the power supply is normal or not? I have never seen this before in a cab and the the wiring is confusing the hell out of me. Started taking apart the monitor chassis last night and found a busted fuse on the end of the picture tube. there are three on the end of the tube. Would this stop any power from getting to the monitor or would this fuse control a certain colour? 
Logged
RiceCube
Newbie
*
Offline Offline

Posts: 17


View Profile
« Reply #7 on: September 08, 2014, 08:47:41 am »

well I gave it a try but I guess no one here can help me out so I will turn it into a Mame table
Logged
VertexGuy
Guest
« Reply #8 on: September 08, 2014, 09:09:24 am »

get the board running and see what it is
Logged
RiceCube
Newbie
*
Offline Offline

Posts: 17


View Profile
« Reply #9 on: September 10, 2014, 08:34:45 am »

I cannot get it running I have no idea what the pin-outs even are for it> i am going to save all the guts for another project after I have learned a bit more.
Logged
VertexGuy
Guest
« Reply #10 on: September 10, 2014, 07:51:22 pm »

lets see a pic of this board
Logged
RiceCube
Newbie
*
Offline Offline

Posts: 17


View Profile
« Reply #11 on: September 10, 2014, 08:03:15 pm »

I posted the pics in a link at the top. https://www.flickr.com/photos/127263296@N03/?savedsettings=15055640641#photo15055640641


That is the link again. There are two good pics of each board. I had them taken apart when I was examining them. I also posted serial and model numbers at the top of the page too
Logged
VertexGuy
Guest
« Reply #12 on: September 10, 2014, 08:09:33 pm »

is the board marked Atari any where on it?
Logged
VertexGuy
Guest
« Reply #13 on: September 10, 2014, 08:25:57 pm »

its a ghost and goblins pcb
Logged
RiceCube
Newbie
*
Offline Offline

Posts: 17


View Profile
« Reply #14 on: September 10, 2014, 10:55:42 pm »

How do you know this for sure?
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Install Simple Machines Forum Valid XHTML 1.0! Valid CSS!