Go7 problem

[Meanstreak05]

Hi I just did a recap on a go7 with a new fly back and new Horizontal Width Coil and reflowed the header pins it seams to take for ever for it to warm up. I also have to go behind the cabinet every time I turn it on and ether adjust the fly back for brightness or the focus or both after it warmed up would it be the new fly back going bad already please let me know it is also on a ms pac thank you again

[Meanstreak05]

I did the g07deluxe kit off bob Roberts if that helps anything

[P-feif]

John had a video for his Jump Bug where he had similar trouble (not sure what monitor) but he found a problem on the neck board. Might want to find and watch that video.

[Meanstreak05]

I will do that thank you

[iankellogg]

G07s are slow to warm up anyways but it sounds like you might have a bad neck socket.

https://www.twistywristarcade.com/monitor-components/1080-9-pin-crt-socket.html

great place to pick up G07 parts btw.