John's Arcade Forum - Classic Arcade and Pinball Collecting and Restoring Discussion Forum - RETRO MAME - Nintendo Vs Forum
November 22, 2024, 03:11:04 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Welcome to the John's Arcade Forum. Glad you made it! Smiley
 
   Home   Help Search Calendar Login Register  
Pages: [1]
  Print  
Author Topic: Anyone have a Galaga Mini?  (Read 2343 times)
0 Members and 1 Guest are viewing this topic.
MagicMarc-er
Newbie
*
Offline Offline

Posts: 46


View Profile
« on: July 08, 2015, 06:02:38 am »

Can't seem to get any help on KLOV so, hopefully, someone here can help.

Could anyone please take a pic inside their Galaga cabaret (or full size since it is probably the same) at the wiring where the 6 pins from the monitor chassis plug into the video board?  Would also like a pic of the same wires where they plug into the chassis. 

I've been having trouble understanding one thing on the schematics and those two pics would really help.
Logged
iankellogg
Global Moderator
Hero Member
*****
Offline Offline

Posts: 1433



View Profile
« Reply #1 on: July 08, 2015, 05:57:36 pm »

Not sure what you need the pic for. The video goes out of the 6 pin header of the PCB and goes right into the monitor with separate cable than the wire harness.
Logged

https://iankellogg.com
Cap kits, eproms, and more
MagicMarc-er
Newbie
*
Offline Offline

Posts: 46


View Profile
« Reply #2 on: July 09, 2015, 12:00:30 pm »

Ian - I am trying to understand how to handle the yellow wire (pin 5 I think on the schematic) is listed as "Yel + Shield Gnd".  It sounds like I'm supposed to tie the yellow wire to a ground wire after it leaves the chassis but it doesn't show up that way on the drawing.  Pull up the Galaga schematic and see if you can tell what I mean.  Any help would be great.

Not sure what you need the pic for. The video goes out of the 6 pin header of the PCB and goes right into the monitor with separate cable than the wire harness.
Logged
iankellogg
Global Moderator
Hero Member
*****
Offline Offline

Posts: 1433



View Profile
« Reply #3 on: July 09, 2015, 12:26:27 pm »

Pin 5 just goes to the ground pin on the monitor input header
Logged

https://iankellogg.com
Cap kits, eproms, and more
MagicMarc-er
Newbie
*
Offline Offline

Posts: 46


View Profile
« Reply #4 on: July 10, 2015, 06:05:03 am »

Thanks, Ian.  I guess I was over thinking it a bit.
Logged
VertexGuy
Guest
« Reply #5 on: July 11, 2015, 12:59:09 am »

Not sure what you need the pic for. The video goes out of the 6 pin header of the PCB and goes right into the monitor with separate cable than the wire harness.

Exactly what he said,, you can also go by a ms pac mini.. they are same
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Install Simple Machines Forum Valid XHTML 1.0! Valid CSS!