arcadeshop.com DK replacement power supply and harness?

[rymin]

Hey guys. I'm new here and I'm in the process of restoring a DK cabinet. i have an original DK board (2 board) and the Sanyo ez-20. I was interested in the harness and power supply that arcade sells, but my question is, does that support the Sanyo ez-20 in terms of both the fact that it needs a 100v power supply and also inverted video? Sorry, I looked around a lot but I'm having trouble finding the answer and I figured it'd be easy to ask if anyone has used the arcade harness before.

Thanks!

*Edit*

Description and picture from arcadeshop.com

/DK Jr./Donkey Kong 3 Wiring Harness and power supply solution (complete solution)
All wiring needed to hook up the pcb. Note: +24 vdc is not supplied for the coin counter.

http://www.arcadeshop.com/pics/kong-harness.jpg

[iankellogg]

the harness is just a bundle of wires so it doesn't care about inverted video and what not. I am not familiar with the harness and power supply you are referring to but if you have a link to It i can tell you if that is what you need.

[rymin]

Thanks for your reply, Ian! I made a mistake. It is on arcadeshop.com, not arcade. Unfortunately they don't provide any other info than the following brief description and image.

/DK Jr./Donkey Kong 3 Wiring Harness and power supply solution (complete solution)
All wiring needed to hook up the pcb. Note: +24 vdc is not supplied for the coin counter.

http://www.arcadeshop.com/pics/kong-harness.jpg

I'm basically just trying to find a nice clean way to hook up my dk pcb to my sanyo ez20 while having all new cables. A new power supply would be nice because im really not sure if the original one found in the cabinet works, or will last a long time, etc. I'm happy to buy new parts for the peace of mind.

Thanks!

[iankellogg]

That one i am familiar with. It uses a modern switching power supply and does have the hook ups for the monitor and control panel. It will just fine for you.

[rymin]

Very cool! Thanks Ian!

[VertexGuy]

Thanks for your reply, Ian! I made a mistake. It is on arcadeshop.com, not arcade. Unfortunately they don't provide any other info than the following brief description and image.

/DK Jr./Donkey Kong 3 Wiring Harness and power supply solution (complete solution)
All wiring needed to hook up the pcb. Note: +24 vdc is not supplied for the coin counter.

http://www.arcadeshop.com/pics/kong-harness.jpg

I'm basically just trying to find a nice clean way to hook up my dk pcb to my sanyo ez20 while having all new cables. A new power supply would be nice because im really not sure if the original one found in the cabinet works, or will last a long time, etc. I'm happy to buy new parts for the peace of mind.

Thanks!

yeah I noticed they just give you a picture. however im gonna order one of these along with an MCR and Williams version just in case.