John's Arcade Forum - Classic Arcade and Pinball Collecting and Restoring Discussion Forum - RETRO MAME - Nintendo Vs Forum
November 01, 2024, 05:40:48 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Welcome to the John's Arcade Forum. Glad you made it! Smiley
 
   Home   Help Search Calendar Login Register  
Pages: [1]
  Print  
Author Topic: Wells Gardner K7100?  (Read 3297 times)
0 Members and 1 Guest are viewing this topic.
xcaliber
Jr. Member
**
Offline Offline

Posts: 81


View Profile
« on: February 03, 2015, 07:53:56 pm »

I'm restoring a MK1 and was going to order a cap kit for the monitor, but I'm confused as to which chassis I have. There is a sticker near the fly back that reads Y3OK7191-000 and then there is another sticker on the side of the chassis that reads WG673288. I believe it is a 7100 series and wanted to make sure by asking you guys. I have never done a cap kit and I want to at least get the right kit. Also, I have pic of the bottom of the monitor PCB. I looks as if it shorted. If it shorted is it repairable or should I just get another?

Logged
P-feif
Sr. Member
****
Offline Offline

Posts: 345


View Profile
« Reply #1 on: February 04, 2015, 06:33:00 pm »

Well I'm no good at indentifying monitors but I bet the guys here that can would like a picture of the whole thing.

That looks repairable to me.
Logged
xcaliber
Jr. Member
**
Offline Offline

Posts: 81


View Profile
« Reply #2 on: February 04, 2015, 08:15:24 pm »


Logged
VertexGuy
Guest
« Reply #3 on: February 04, 2015, 08:53:48 pm »

I'm restoring a MK1 and was going to order a cap kit for the monitor, but I'm confused as to which chassis I have. There is a sticker near the fly back that reads Y3OK7191-000 and then there is another sticker on the side of the chassis that reads WG673288. I believe it is a 7100 series and wanted to make sure by asking you guys. I have never done a cap kit and I want to at least get the right kit. Also, I have pic of the bottom of the monitor PCB. I looks as if it shorted. If it shorted is it repairable or should I just get another?



you can/somebody/it can be fixed.
Logged
amoore2600
Newbie
*
Offline Offline

Posts: 14



View Profile WWW
« Reply #4 on: February 12, 2015, 03:04:11 pm »




The Chassis is a P538 = 25K7193

Check the Bill of Materials (BOM) Reference below

https://www.wellsgardner.com/service/bom_reference.asp
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Install Simple Machines Forum Valid XHTML 1.0! Valid CSS!