 Show Posts
|
|
Pages: [1]
|
|
2
|
Arcade and Pinball Discussions / Beginner's Help Corner / Re:
|
on: December 01, 2015, 08:30:07 pm
|
|
Neck board is completely seated. The chassis is definitely confirmed to be working on a separate machine so is it likely that I just need a new tube? The one I have, like I said, is getting power and I can hear it give off that light CRT hum but there's absolutely no light coming out
Sent from my XT1095 using Tapatalk
|
|
|
|
|
3
|
Arcade and Pinball Discussions / Beginner's Help Corner / Re:
|
on: November 04, 2015, 01:08:09 pm
|
|
Wouldn't any of those troubleshooting steps be negated by completely replacing the chassis with a known working one? That's why I was thinking it's the tube or monitor
Sent from my XT1095 using Tapatalk
|
|
|
|
|
4
|
Arcade and Pinball Discussions / Beginner's Help Corner / Re: Tekken 2 Issue
|
on: November 02, 2015, 09:38:25 pm
|
|
Update: I just got home from work and it's powered on and working again! Now my question is what could have happened to cause it to do that then just suddenly work 6 hours later? We're having unusually rainy/snowy/cold weather today and it's in my garage if that's a contributing factor.
|
|
|
|
|
5
|
Arcade and Pinball Discussions / Beginner's Help Corner / Tekken 2 Issue
|
on: November 02, 2015, 04:48:26 pm
|
|
Last night my Tekken 2 cabinet was working just great. I powered it off then went to bed. I turned it on today and now it isn't working. The monitor and marquee light comes on, but the game isn't putting out video or sound. Also, the coin return bulbs flash on just for a brief moment then go out. I haven't had a chance to do any troubleshooting yet, but thought I'd see which direction to take. Possibly a blown fuse?
|
|
|
|
|
7
|
Arcade and Pinball Discussions / Beginner's Help Corner / G07 No Neck Glow
|
on: November 01, 2015, 07:28:30 pm
|
|
Hey guys! I'm very much a newbie when it comes to arcade repair but I'm enjoying learning. I just recently bought a Centipede cabaret that plays blind. When I power it on, the monitor is showing no neck glow, there's no brightness coming off the screen at all, but I can hear the monitor coming on. Whenever I discharge the monitor I get a decent pop too. I've checked the connection to the monitor and it's receiving 120v. I thought the chassis might have some issues, so I replaced it with one that's been confirmed to work - still no luck. At this point, what should I look at? Could it be that I just need a completely new monitor? Thanks!
|
|
|
|
|
