i have a problem with getting some electrical work done for my home arcade. i have an electrician telling me with my 200 amp box that i wont be able to have the number of games i am looking to collect. could you tell me what of if you did anything special to run the number of games you have?
I have an issue. I had no sounds and just silence. The control panel didn't work. I was advised to swap the lm 324 and pokey so I did. Now I get static to the speakers and still nothing to the control panel. In test mode the control panel works. I wiggle the hardness at the pcb and the static goes in and out. Could it be the harness or something else on the board. Please help
I check the power supply board and the voltages are a bit high. 5 is right on 5. But the 10 is 12 and the 22 is 25.when I check it at the pcb pins I show 5 and I can't get anything else. The connector now that I have studied them more, seem to be missing pins here and there were it appears there should be one. I think I have a bad harness. Is there anything else I should try? I don't see anyway of lowering the voltage but maybe I am missing something. Any help is appreciated
I got the game about 3 weeks ago. Game wouldn't boot up but the control panel would come on.so I replace some fuses and the big blue cap. Game boots up but control panel will not now and the game has no sound. The speakers are getting power because I can hear some humming when I turn them up. I had took the panel off to clean it and replace the ball. I put the new ball in and nothing worked. I reinstalled the old and still nothing. Does anyone know what I could try? Is it possible there in not enough power to support the panel and speakers?