Looking for a sound board for a SEGA Hang On. If you have one for sale please PM me.

also,, if anybody here does a successful swap.. details on tv models and years please.
and what chassis they work with.

Here are some great resources:

http://tubular.atomized.org/#s/p

http://junknet.net/donor-tvs

I have done this too. Its great. New monitor for almost nothing. Here's my video:

Arcade Monitor Rebuild with Tube Swap: http://youtu.be/Nj3kNfdWNdQ

I bought from Bob today. Hes a little on the expensive side but he's a good guy.

would the same ones be used on a super hang on cab?

I don't believe they are used on super hang on. I pulled a parts list for super hang on from http://www.arcade-museum.com/manuals-videogames/S/Super%20HangOn%20Upright%20Owners%20English.pdf

I did not see M8 X 40MM TORX on the parts list.

Thanks for checking.

does it have to be torx? why not a more common head?

I would like them to be torxs as they are highly visible and would match the smaller torx screws next to them.

I need four black M8 X 40MM TORX button head screws to finish up on my Afterburner cab. Tracking these down has been near impossible here in the U.S.A. as I guess this is a European part. If any one can help find me some here in the U.S.A please let me know. Here's what they look like http://www.accuscrews.co.uk/54152-thickbox_default/SHB-M8-40-A2-BL.jpg

amoore2600 checking in! Some of you might know me from /r/cade over at reddit. I am pretty active there.

I am also the owner of Beercade of Tampa. We're not open for business yet but, we will open in 2015.

If you want to know more about us check us out at http://beercadeoftampa.com

My collection of games can be seen here: http://beercadeoftampa.com/Arcades.html

  

Looking to start a Ninja Baseball Bat Man Project.

I have an Official PCB for NBBM and Drew Maniscalco (Creator of NNBM) let me know he could provide some art for it.

I just need to find a 4 player Konami Style Cab in FL as I think this would be the best fit for this game. I will take one in any condition.

I got mine from here http://quarterarcade.com/Game.aspx/10810
it is only correct for standard 2 or 4 slots though, the other versions are not made and you will have to source a used one or NOS if you have a 1 or 6 slots.

I got mine from here. I am very happy with it.

I am a member! Same user name.

Paint sand repeat! do this 2 or 3 times. the best results come from spraying but if you don't have the tools then a roller with a short nap will do.

The Chassis is a P538 = 25K7193

Check the Bill of Materials (BOM) Reference below

https://www.wellsgardner.com/service/bom_reference.asp

I made a video for a tube swap I did for a WG 19k7000 https://www.youtube.com/watch?v=Nj3kNfdWNdQ