|
Title: space invaders deluxe help pic inside Post by: lojack on April 16, 2014, 08:26:52 pm hi all
finally getting started on my space invaders deluxe restore. turned it on finally and this is what i get on the screen https://www.dropbox.com/s/ibl51tjfjozf4en/space-invaders-problems.jpg (https://www.dropbox.com/s/ibl51tjfjozf4en/space-invaders-problems.jpg) checked the voltages and everything is on point. not sure where to go from here. anyone have any suggestions? Thanks lojack Title: Re: space invaders deluxe help pic inside Post by: iankellogg on April 16, 2014, 09:17:41 pm I would start with the PCB. The monitor looks okay. you can plug the PCB into a normal TV using composite.
http://forums.arcade-museum.com/showthread.php?t=86251 Title: Re: space invaders deluxe help pic inside Post by: ousoonerfan2006 on April 16, 2014, 09:25:23 pm Re-seat the board, it's shaped like an "L". You can clean the male edge connector with a pencil eraser carefully.check your voltages, and re-seat the few chips that are socketed. Should get it going, not much to go wrong with it.
Title: Re: space invaders deluxe help pic inside Post by: lojack on April 16, 2014, 09:32:55 pm i cleaned the edge connectors (male) before the test. i will try the chips next
Title: Re: space invaders deluxe help pic inside Post by: iankellogg on April 17, 2014, 07:41:46 am http://www.outerworldarcade.com/arcade/space_invaders/space_invaders_test_rom.html
I could burn you one if you wanted to try this. If you ship it back to me I won't even charge you! |