|
Title: Lets be the first to figure this issue out. Post by: STEVESPEEZE on March 12, 2014, 11:28:26 am My issue , and a lot of other people on the net have the same problem but nobody
seemed to come up with a direct answere. MORTAL KOMBAT 2 SOUNDBOARD NOT WORKING... now I do have one that does not work, and I know john has that Guru friend and im not pulling any stops so lets find out why these bad boys suddenly quit. today im going to recap the entire board and buy a new ribbon. My power supply does have -5v hooked up . but I ran around the entire web and everybody that has the same issue has not come up with an answere. not even KLOV. the board is clean and undamaged, it does have some eproms and a processor on it but those look undamaged as well. and yes, I do have the power cable. Title: Re: Lets be the first to figure this issue out. Post by: lesoleil70 on March 12, 2014, 12:19:04 pm read this?
http://forum.arcadeotaku.com/viewtopic.php?f=26&t=11592 Title: Re: Lets be the first to figure this issue out. Post by: STEVESPEEZE on March 12, 2014, 01:31:29 pm read this? http://forum.arcadeotaku.com/viewtopic.php?f=26&t=11592 yeah anyways lol... Title: Re: Lets be the first to figure this issue out. Post by: STEVESPEEZE on March 12, 2014, 01:32:37 pm K I got a buncha goodies.. except a DAC which I have a funny feeling its gonna be that.
(http://i1203.photobucket.com/albums/bb392/turbografx/IMG_1190.jpg) (http://s1203.photobucket.com/user/turbografx/media/IMG_1190.jpg.html) Im not giving up until I get this bitch going. Im gonna reseat the roms, change the caps and try a new ribbon first. after that its either gonna be the roms or the DAC Title: Re: Lets be the first to figure this issue out. Post by: iankellogg on March 12, 2014, 01:32:59 pm maybe the amps are dead.
Title: Re: Lets be the first to figure this issue out. Post by: STEVESPEEZE on March 12, 2014, 01:35:20 pm read this? http://forum.arcadeotaku.com/viewtopic.php?f=26&t=11592 what I meant to say is I read this a week ago. but we are all smarter so lol... I only wish I had a spare board to use the parts to trouble shoot these. reason being I have more than one MK set coming to me soon. Title: Re: Lets be the first to figure this issue out. Post by: lesoleil70 on March 12, 2014, 02:27:46 pm read this? http://forum.arcadeotaku.com/viewtopic.php?f=26&t=11592 what I meant to say is I read this a week ago. but we are all smarter so lol... I only wish I had a spare board to use the parts to trouble shoot these. reason being I have more than one MK set coming to me soon. just incase you haven't gone down the bleeding obvious route, here's the manual. https://archive.org/details/ArcadeGameManualMortalkombat2 Title: Re: Lets be the first to figure this issue out. Post by: STEVESPEEZE on March 12, 2014, 03:13:22 pm read this? http://forum.arcadeotaku.com/viewtopic.php?f=26&t=11592 what I meant to say is I read this a week ago. but we are all smarter so lol... I only wish I had a spare board to use the parts to trouble shoot these. reason being I have more than one MK set coming to me soon. just incase you haven't gone down the bleeding obvious route, here's the manual. https://archive.org/details/ArcadeGameManualMortalkombat2 In case you haven't noticed... we are the elite forum sight Les... never forget that. Plus I already had the manual but I cant read (lol I just didn't wanna) Ladies and Gentlemen I figured it out.... https://www.youtube.com/watch?v=VV2LCYlx10E Changed all the caps, changed the crystal, bought a new ribbon, checked all my solder connections, reseated every rom (one actually had a pin not in) This thing im told is real picky about voltages.. any one of those things could have caused just enough drop to not make it work. and here is where you might check first .. the DAC overheats... you have to take the sink off.. reflow the solder, re paste it. put the sink back on. Title: Re: Lets be the first to figure this issue out. Post by: STEVESPEEZE on March 12, 2014, 04:35:26 pm maybe the amps are dead. what amps? that whole board is the amp lol. Title: Re: Lets be the first to figure this issue out. Post by: iankellogg on March 12, 2014, 06:12:39 pm no the whole board is not the amps. I am talking about the audio amps since those often go bad. but you got it working so it doesnt matter.
Title: Re: Lets be the first to figure this issue out. Post by: STEVESPEEZE on March 12, 2014, 06:22:02 pm ok but what amps? lol
I think the data goes back to the mainboard and out to the speakers I don't think the amp is on that board. I dunno I think DCS started with MK2 and forward on the midway boards. Title: Re: Lets be the first to figure this issue out. Post by: STEVESPEEZE on March 12, 2014, 07:02:43 pm K I got a buncha goodies.. except a DAC which I have a funny feeling its gonna be that. (http://i1203.photobucket.com/albums/bb392/turbografx/IMG_1190.jpg) (http://s1203.photobucket.com/user/turbografx/media/IMG_1190.jpg.html) Im not giving up until I get this bitch going. Im gonna reseat the roms, change the caps and try a new ribbon first. after that its either gonna be the roms or the DAC That's not a ribbon , its a gay bacon strip btw |