|
Title: Dull Dark Colors K7000 Post by: Zuul86 on January 27, 2017, 08:27:07 am I just caped my k7000 and replaced the flyback. The colors are still real washed out and dark. If I turn up the brightness the blacks are grey and colors are still dull. Also sometimes greys and whites jump around and are askew. See videos below. What do I do next?
https://goo.gl/photos/knNBLvyJ8xbBP7qi7 https://goo.gl/photos/U4hNenEzsxt55f4e7 https://goo.gl/photos/xGwoMQafFWdEF95U8 Title: Re: Dull Dark Colors K7000 Post by: Hooligan93 on January 27, 2017, 11:47:52 am Make sure your deguass coil is plugged it. Check your B+ voltage. Wipe your color pots. Move your cabinet around to see if it changes color quality. check out Johns Gyruss restore video about deguass and rejuve.
PS Is this the same monitor that had broken pin on neck? Title: Re: Dull Dark Colors K7000 Post by: Zuul86 on January 27, 2017, 12:43:25 pm Yes this is the same monitor. The broken pin in question is the focus. I reattached it with silver epoxy.
Title: Re: Dull Dark Colors K7000 Post by: Zuul86 on February 04, 2017, 07:52:02 pm Problem solved. I didn't look at the plugs close enough when I got the cab. The three hole plug that has the ground and composite sync was shifted over by one. So the ground was not connected and the sync was hooked up to the ground.
Title: Re: Dull Dark Colors K7000 Post by: Hooligan93 on February 04, 2017, 07:55:45 pm WTG, good job.
|