|
Title: Changing Vs. Duck Hunt to Vs. Gradius Post by: Jacob-VIC-VIPER on September 03, 2013, 07:43:45 am I really want to change my pcb from my Vs. Cabinet but how would I go
About removing the Zapper & gun holster from 2nd player side of the panel so I can reattach the 2nd player joystick? Title: Re: Changing Vs. Duck Hunt to Vs. Gradius Post by: John's Arcade on September 03, 2013, 09:18:47 am I really want to change my pcb from my Vs. Cabinet but how would I go About removing the Zapper & gun holster from 2nd player side of the panel so I can reattach the 2nd player joystick? I have never had to deal with a VS. Gun but I imagine it's nothing more than disconnecting everything and plugging a joystick back in. No? Title: Re: Changing Vs. Duck Hunt to Vs. Gradius Post by: Joe3693 on September 03, 2013, 09:32:18 am As long as someone didnt hack at the harness, all the connectors for the 2nd joystick will be there. Just take out the gun harness and unbolt the holster, then bolt up the joystick and connect the 8 wires.
Title: Re: Changing Vs. Duck Hunt to Vs. Gradius Post by: Jacob-VIC-VIPER on September 03, 2013, 10:09:38 am Thanks for the response, I appriciate the help. I notice when I removed the gun mount, there were two large holes, what would u recommend i fill them with Wood Putty or bondo?
Title: Re: Changing Vs. Duck Hunt to Vs. Gradius Post by: Joe3693 on September 03, 2013, 11:02:03 am Do you have any pictures? Typically the holster is bolted with the same holes as the joystick. There shouldnt be any extra holes.
|