|
Title: Donkey Kong Cocktail Board Post by: Dennis423 on September 11, 2016, 11:01:35 am Just picked up a DK cocktail. I was cleaning/reseating chips on the CPU and broke a leg.
It is the TKG3-V, 5H chip. Can anyone burn a replacement? I also need a 24 pin socket for the board. Any help or direction will help! Thanks! Dennis423 Title: Re: Donkey Kong Cocktail Board Post by: John's Arcade on September 11, 2016, 02:43:39 pm Just picked up a DK cocktail. I was cleaning/reseating chips on the CPU and broke a leg. It is the TKG3-V, 5H chip. Can anyone burn a replacement? I also need a 24 pin socket for the board. Any help or direction will help! Thanks! Dennis423 Is that the ROM? I buy sockets on ebay all the time: http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR1.TRC0.A0.H0.X24+pin+socket.TRS0&_nkw=24+pin+socket&_sacat=0 Burn roms here: http://www.hobbyroms.com Title: Re: Donkey Kong Cocktail Board Post by: Dennis423 on September 11, 2016, 03:48:36 pm Awesome! Sockets ordered and emailed hobby ROMs.
It is a EPROM on the video board. Will Hobby ROMs burn the EPROM for me? I have no way of doing this in my garage. Thanks again! Dennis423 Title: Re: Donkey Kong Cocktail Board Post by: John's Arcade on September 11, 2016, 07:38:54 pm Awesome! Sockets ordered and emailed hobby ROMs. It is a EPROM on the video board. Will Hobby ROMs burn the EPROM for me? I have no way of doing this in my garage. Thanks again! Dennis423 Hobby ROMs will burn whatever Rom you need |