John's Arcade Forum - Classic Arcade and Pinball Collecting and Restoring Discussion Forum - RETRO MAME - Nintendo Vs Forum

Tech and Marketplace => I need help with my game! - Technical Discussion => Topic started by: grantopia on August 07, 2016, 02:49:26 pm



Title: Ikari Warriors - No Sound
Post by: grantopia on August 07, 2016, 02:49:26 pm
Picked up an Ikari Warriors with no sound today. Volume adjustments on the PCB don't seem to do anything. I reseated the edge connector and I'm getting 4.63v at the 5v on the board and 12.9 at the 12v. Unfortunately I forgot to measure the -5 because we're running out for a while so I can check that later if needed. I can't seem to find a good board diagram to see if anything needs to be reseated related to the sound or just checked to see if it's broken or not getting voltage. Any ideas on where to go? Thanks!


Title: Re: Ikari Warriors - No Sound
Post by: Megmaster17 on August 13, 2016, 01:06:54 pm
Long shot but make sure speaker is connected and working