John's Arcade Forum - Classic Arcade and Pinball Collecting and Restoring Discussion Forum - RETRO MAME - Nintendo Vs Forum

Arcade and Pinball Discussions => General Arcade and Video Game Discussions => Topic started by: Commando on July 19, 2016, 01:27:02 pm



Title: Donor tv's
Post by: Commando on July 19, 2016, 01:27:02 pm
Hello

This page lists usable tubes.

http://junknet.net/donor-tvs

But for most of them he does not list what chassis would fit. So how useful is that? :)
Is there a better list out there and maybe a list of chasis'es (how to spell the plural?) and their working specs?




Title: Re: Donor tv's
Post by: Commando on July 20, 2016, 02:12:00 pm
5 views and no answer...woah....Guess I should go to klov.....


Title: Re: Donor tv's
Post by: TimeRunner on July 22, 2016, 09:34:10 am
You waited for one day. Didn't know you had a timer going. ;)


Title: Re:
Post by: dreich on July 23, 2016, 01:56:33 am
Well most chassis fit so long as the neck board socket is the same and you swap yokes I have had good luck with Orian  TVS from the 90s to fix go7s and such, but yeah any chassis will fit   with a yoke swap so long as it's the right kind of tube (vector, mid res, B&W, ect) realignment of the joke is a pain but the results are worth it. I have even used tubes that used to have a bonded yoke if you are cleaver about removing it. If anyone sees I put misinformation feel free to correct me but I hope this helps

Sent from my SCH-I545 using Tapatalk


Title: Re: Donor tv's
Post by: BadMonkey on July 23, 2016, 04:35:45 pm
Good luck finding a decent chart. Seems to be a closely guarded secret.