John's Arcade Forum - Classic Arcade and Pinball Collecting and Restoring Discussion Forum - RETRO MAME - Nintendo Vs Forum

Tech and Marketplace => I need help with my game! - Technical Discussion => Topic started by: Meanstreak05 on February 15, 2016, 05:58:10 pm



Title: Go7 problem
Post by: Meanstreak05 on February 15, 2016, 05:58:10 pm
Hi I just did a recap on a go7 with a new fly back and new Horizontal Width Coil and reflowed the header pins it seams to take for ever for it to warm up. I also have to go behind the cabinet every time I turn it on and ether adjust the fly back for brightness or the focus or both after it warmed up would it be the new fly back going bad already please let me know it is also on a ms pac thank you again


Title: Re: Go7 problem
Post by: Meanstreak05 on February 15, 2016, 06:05:09 pm
I did the g07deluxe kit off bob Roberts if that helps anything


Title: Re: Go7 problem
Post by: P-feif on February 15, 2016, 09:44:18 pm
John had a video for his Jump Bug where he had similar trouble (not sure what monitor) but he found a problem on the neck board. Might want to find and watch that video.


Title: Re: Go7 problem
Post by: Meanstreak05 on February 16, 2016, 12:50:35 am
I will do that thank you


Title: Re: Go7 problem
Post by: iankellogg on February 16, 2016, 09:19:41 am
G07s are slow to warm up anyways but it sounds like you might have a bad neck socket.

https://www.twistywristarcade.com/monitor-components/1080-9-pin-crt-socket.html

great place to pick up G07 parts btw.