|
Title: Donkey Kong PCB Post by: xcaliber on February 07, 2016, 03:30:00 pm Guys,
I have a DK cab that is, for the most part, missing the PCB. How do I know which PCB was in mine. I was looking on ebay and noticed that some are 2 stack and some are 4 stack. Someone converted it to a WWII '42. It has two slots for what would appear to be for two boards. Title: Re: Donkey Kong PCB Post by: iankellogg on February 08, 2016, 08:33:04 am it was probably a 2 board stack but it doesn't really matter. Both use the discrete connectors. and only the 2 board stack can use the edge connector. If you don't have the original harness you probably wan't to get the two board stack.
|