|
Title: Golden Tee 2002 - Dead Board Post by: kingdbag on October 04, 2015, 05:05:22 pm Hey guys,
I have a Golden Tee 2002 board that gets stuck right after it detects a hard drive and won't do anything else. Anyone have an experience with GT machines and might know what to look at? It has to be board related because I bought a 2005 board on ebay and it works perfectly. Plus I've already checked voltages, etc. I also know it isn't a bad boot EPROM because I'm using the EPROM in my 2005 board. That doesn't mean that socket isn't bad though... any pointers would be much appreciated. It would be sweet to get the old board working. Below is all that it shows and just sits there it doesn't reboot or anything. Code: Detecting IDE hard drive... Title: Re: Golden Tee 2002 - Dead Board Post by: iankellogg on October 05, 2015, 07:40:51 am I wish I could help on this one. I don't have a clue where to go with it.
You've already used the hard drive with another board? Title: Re: Golden Tee 2002 - Dead Board Post by: kingdbag on October 05, 2015, 06:37:01 pm Short answer... I don't have another 2002 board to try the HD on. I tried using the 2002 HD and 2002 security chip on my 2005 board and it is complaining of a software mismatch (even though when it loads it shows the sec chip=HD version). I'm guessing there is something else updated on the board showing it as a 2005 instead of 2002, so it won't load the old HD even though I have the matching security chip.
This is my first ever cabinet so I'm really new at all this, but the board honestly is in great shape... not sure what the heck could be wrong with it. I don't see any cold solder points or bad traces, etc... |