|
Title: Atari Badlands pedal issues Post by: BigCanTikiMan on August 28, 2015, 01:15:51 pm I been looking everywhere for badlands pedals cant find them anywhere. So i heard people using Road Blaster pedals but i got play around with the wiring. The Road blaster pedal has a potentiometer in it. i have it working but it is the opposite. When i press on the pedal it stops and when i let go it go's. Do i need to add another wire to it OR any good ideas will be a help?
badlands has 3 wires ground (to the pedal)/in/out Manual http://www.atarigames.com/index.php?option=com_content&view=article&id=80:badlands-game-manual&catid=7:game-manuals&Itemid=5 Road blaster has 4 ground(to the pedal)/In/Out/Ground (to the potentiometer) Manual http://www.arcade-museum.com/manuals-videogames/R/Road%20BlastersReduced.pdf Title: Re: Atari Badlands pedal issues Post by: BigCanTikiMan on September 06, 2015, 10:34:09 pm I figure it out.
Road blaster pedal has 4 wires. ground (green), potentiometer In (red), potentiometer out (White) and potentiometer ground (black). Bad lands is 3 wires. ground (green), in (purple/red) and out (blue). The grounds go together (Green wires). Then hook up potentiometer in (red) to the in (purple/red). Last potentiometer out (White) and potentiometer ground (black) need to be put together with out (blue). |