|
Title: Baby Pacman lighting help Post by: Purity on May 08, 2013, 03:26:27 pm I was wondering if someone with a Baby Pacman could take a picture of the ballast, and starter that is on there cabinet for the marque lighting? Also I'm interested in how this connects to the cabinet. I can see that it connects to a grey cable with 3 pins, but this has been cut on my cabinet so I don't know where it leads too. From looking at the schematics it looks like it goes via the monitor power somewhere but I cannot see where.
Any help would be appreciated Thanks Ben Title: Re: Baby Pacman lighting help Post by: Purity on May 08, 2013, 04:33:26 pm Ok I've worked out where the power comes from now :-)
Title: Re: Baby Pacman lighting help Post by: John's Arcade on May 09, 2013, 03:05:14 pm Ok I've worked out where the power comes from now :-) Cool! You're all set? Title: Re: Baby Pacman lighting help Post by: Purity on May 13, 2013, 04:36:01 pm Ok I've worked out where the power comes from now :-) Cool! You're all set? Think so. The monitor and ballast share power. Looking at the monitor schematics the input is 120v. Clearly the lighting has been directly wired to the mains as it's got a 220v ballast. I think what should be there is a 120v 50hz 15w ballast, with a 15w 120v starter. |