|
Title: Pacman cocktail Post by: Epop on July 29, 2015, 11:51:37 pm Hey yall,
My name is Clint and I am new to the board and to arcade games. I live on Marietta ga. None the less my question is. I plan to build a pack man cocktail table. I have a PCB that needs some work and I will save those questions for another post. 1. Where can I find some good pacman cocktail plans that have detailed mesurments? 2. I got a working up right pacman harness. It has all the wiring. Can I make this a cocktail harness? I am guessing I just need a cocktail pin out and add the wires to the edge connector for player 2. Guess the is a good start. I am sure I will have more questions. Sent from my SAMSUNG-SM-G750A using Tapatalk Title: Re: Pacman cocktail Post by: iankellogg on July 30, 2015, 09:21:31 am You will have to add the 2 player controls and there is somethign you have to do to the harness to make it work for cocktail. I don't remember right away, I think you have to ground the cocktail pin.
Title: Re: Pacman cocktail Post by: jtslade on July 30, 2015, 06:18:17 pm I have one if you need anything
Sent from my iPhone using Tapatalk Title: Re: Pacman cocktail Post by: tombutler on July 30, 2015, 07:12:36 pm Good luck!
Title: Re: Pacman cocktail Post by: Epop on July 30, 2015, 10:11:05 pm Jtslade not sure yet what I will need I am sure I'll have a lot of questions. For now some patients for the new guy trying to learn the hard way. And may some good pics of the cocktail cabinet inside and our any pics you think might help will be very much appreciated.
Sent from my SAMSUNG-SM-G750A using Tapatalk Title: Re: Pacman cocktail Post by: Philip_J_Fry on July 31, 2015, 09:08:13 pm Kyle lindstrom has very detailed blueprint for the cabinet, he has 1 for pac and 1 for ms pac. Mikesarcade.com has a link to it. I built the mspac version with a few slight modifications . It is time consuming , it took me 4 months to build . One change i made was i used real wood that was stain grade quality instead of plywood an it really paid off. I used ebay to scrap together the midway coin door original feet an overlay 20 reunion overlay . I used holland computers for the buttons an glass.
Title: Re: Post by: Epop on July 31, 2015, 09:49:29 pm Awesome thanks for the tip. I plan to build mine from real wood as well.
Thank you thank you thank you! Sent from my SAMSUNG-SM-G750A using Tapatalk |