John's Arcade Forum - Classic Arcade and Pinball Collecting and Restoring Discussion Forum - RETRO MAME - Nintendo Vs Forum

Arcade and Pinball Discussions => General Arcade and Video Game Discussions => Topic started by: cocoflipflop on July 16, 2015, 08:47:05 pm



Title: monitor bath ?? is this really ok to do ?
Post by: cocoflipflop on July 16, 2015, 08:47:05 pm
was watching a donkey kong restore video and this guy took cleaner and a hoes to his monitor with a scrub brush. this made me cringe for some reason just wondering if this is normal to do or is a litle extreme and risky? Thoughts?
here is the link
https://youtu.be/e91NybttYBg?t=745


Title: Re: monitor bath ?? is this really ok to do ?
Post by: knaagi on July 17, 2015, 12:33:57 am
I removed a G07 from my Missile Command, put it in our bathtub and showered off the whole unit. You just have to make sure it´s completely dry before putting it back in the cab. I did let it sit outside for a whole day when it was warm outside.


Title: Re: monitor bath ?? is this really ok to do ?
Post by: StevesArcade on July 17, 2015, 01:45:07 am
Thats Uncle Tighe...lol... water isnt the enemy of electronics.  electricity in wet electronics is the enemy lol.  Wash away and have fun.. Just discharge it and make sure its completely dry



Title: Re: monitor bath ?? is this really ok to do ?
Post by: iankellogg on July 17, 2015, 07:38:48 am
Yeah don't worry about throwing electronics in water. I put mine through the dish washer all the time. Just have to be careful not to use too much heat and don't scrub too hard.


Title: Re: monitor bath ?? is this really ok to do ?
Post by: offset on July 17, 2015, 10:45:25 am
Do you have to wait awhile for the electrolytic caps to dry out?  I tend to just use the air compressor on my monitors as I'm paranoid about liquids and electronics.


Title: Re: monitor bath ?? is this really ok to do ?
Post by: iankellogg on July 17, 2015, 01:46:23 pm
Electrolytics aren't usually the problem. its connectors, the width coil and just all the little places water can sit.

Usually i am doing a washing to bring it into the repair bench. So i wash it weeks before i ever get around to working on it.
If i am in a big hurry i will throw it into the oven set to 140f for like an hour.


Title: Re: monitor bath ?? is this really ok to do ?
Post by: BDawg on August 03, 2015, 10:39:14 pm
Yay my first post.....

anyways about washing YOUR monitor....
Ive washed to many monitors and have never had an issue.
just like the video you seen spray em down with simple green an then rinse.
but make sure to let them Completely dry out before any power get put to them.




Title: Re: monitor bath ?? is this really ok to do ?
Post by: David P on August 17, 2015, 10:47:33 pm
Got love simple green I remember cleaning aircraft with them when I worked at a flying club