|
Title: monitor help. Sanyo 20ez. Post by: randywhatson on June 08, 2015, 08:21:27 pm Hey everybody. Scott here (the same guy with the Centipede/ikari warrior conv. with the F'ed up monitor.)
So... I bought two Nintendo Blue cabinets. They are both converted to Vs. machines. One is plywood and in good shape. The other is particle board and swelled up like a water balloon (shocker, right). They are both missing parts. So I am turning two incompletes into one complete. Actually, it's done. The plywood one had no monitor and the other had a good monitor with no burn. The thing is, the monitor is ... (how do I describe it) cut off at the top. Actually, it looks like the vertical is off. The bottom has an extra inch gap and the top is all scrunched. I made the image smaller... so at least I can read the high score, but I know there is something I can do to fix it properly. Any ideas? Title: Re: monitor help. Sanyo 20ez. Post by: iankellogg on June 09, 2015, 07:44:30 am Take a peak inside there should be a little jumper labeled vertical offset. download the manual for a bit more description of where it is. But that controls about 1-2 inches of vertical offset.
|