|
Title: arcadeshop.com DK replacement power supply and harness? Post by: rymin on June 08, 2015, 07:08:39 pm Hey guys. I'm new here and I'm in the process of restoring a DK cabinet. i have an original DK board (2 board) and the Sanyo ez-20. I was interested in the harness and power supply that quarter arcade sells, but my question is, does that support the Sanyo ez-20 in terms of both the fact that it needs a 100v power supply and also inverted video? Sorry, I looked around a lot but I'm having trouble finding the answer and I figured it'd be easy to ask if anyone has used the quarter arcade harness before.
Thanks! *Edit* Description and picture from arcadeshop.com Donkey Kong/DK Jr./Donkey Kong 3 Wiring Harness and power supply solution (complete solution) All wiring needed to hook up the pcb. Note: +24 vdc is not supplied for the coin counter. http://www.arcadeshop.com/pics/kong-harness.jpg Title: Re: Quarter arcade DK replacement power supply and harness? Post by: iankellogg on June 08, 2015, 07:57:09 pm the harness is just a bundle of wires so it doesn't care about inverted video and what not. I am not familiar with the harness and power supply you are referring to but if you have a link to It i can tell you if that is what you need.
Title: Re: arcadeshop.com DK replacement power supply and harness? Post by: rymin on June 09, 2015, 01:58:28 am Thanks for your reply, Ian! I made a mistake. It is on arcadeshop.com, not quarter arcade. Unfortunately they don't provide any other info than the following brief description and image.
Donkey Kong/DK Jr./Donkey Kong 3 Wiring Harness and power supply solution (complete solution) All wiring needed to hook up the pcb. Note: +24 vdc is not supplied for the coin counter. http://www.arcadeshop.com/pics/kong-harness.jpg I'm basically just trying to find a nice clean way to hook up my dk pcb to my sanyo ez20 while having all new cables. A new power supply would be nice because im really not sure if the original one found in the cabinet works, or will last a long time, etc. I'm happy to buy new parts for the peace of mind. Thanks! Title: Re: arcadeshop.com DK replacement power supply and harness? Post by: iankellogg on June 09, 2015, 07:33:08 am That one i am familiar with. It uses a modern switching power supply and does have the hook ups for the monitor and control panel. It will just fine for you.
Title: Re: arcadeshop.com DK replacement power supply and harness? Post by: rymin on June 09, 2015, 03:56:35 pm Very cool! Thanks Ian!
Title: Re: arcadeshop.com DK replacement power supply and harness? Post by: VertexGuy on June 10, 2015, 08:44:36 am Thanks for your reply, Ian! I made a mistake. It is on arcadeshop.com, not quarter arcade. Unfortunately they don't provide any other info than the following brief description and image. Donkey Kong/DK Jr./Donkey Kong 3 Wiring Harness and power supply solution (complete solution) All wiring needed to hook up the pcb. Note: +24 vdc is not supplied for the coin counter. http://www.arcadeshop.com/pics/kong-harness.jpg I'm basically just trying to find a nice clean way to hook up my dk pcb to my sanyo ez20 while having all new cables. A new power supply would be nice because im really not sure if the original one found in the cabinet works, or will last a long time, etc. I'm happy to buy new parts for the peace of mind. Thanks! yeah I noticed they just give you a picture. however im gonna order one of these along with an MCR and Williams version just in case. |