John's Arcade Forum - Classic Arcade and Pinball Collecting and Restoring Discussion Forum - RETRO MAME - Nintendo Vs Forum

Tech and Marketplace => I need help with my game! - Technical Discussion => Topic started by: madlou2 on December 29, 2014, 03:46:56 pm



Title: Jr. Pac-Man were to find a test pattern to adjust color.
Post by: madlou2 on December 29, 2014, 03:46:56 pm
My Jr. PAC-Man has red and blue eating dots instead of just one dot in the play field. I don't know how to align the red blue and green on the monitor. Any help would be appreciated. This is my first post.



Title: Re: Jr. Pac-Man were to find a test pattern to adjust color.
Post by: iankellogg on December 31, 2014, 03:45:41 pm
well you are going to want to spend a good amount of time reading online and watching videos on youtube on how to converge a monitor.

In short you are going to have to loosen up the yoke rings and adjust them on the back of the monitor while its running.



Title: Re: Jr. Pac-Man were to find a test pattern to adjust color.
Post by: madlou2 on January 01, 2015, 01:27:57 am
well you are going to want to spend a good amount of time reading online and watching videos on youtube on how to converge a monitor.

In short you are going to have to loosen up the yoke rings and adjust them on the back of the monitor while its running.


Thanks for the reply. I'll research further on u-tube. I thought it might be a convergence problem. Thanks again for the advice and Happy New Year!!!!!