|
Title: PC 10 duel monitor Post by: Antman on September 05, 2014, 12:44:01 am Going to look at a PC 10 duel tomorrow
Guy said the board works but both monitors are out And it should be full of games If it's just cap kits im good to fix it or a PS WISH ME LUCK! Any thoughts of what to check first for the duel monitor ? Should I plug it in to try and hear it make noise before I buy? Should be full of games. "No exact number given in text" "Or game titles" $225 Title: Re: PC 10 duel monitor Post by: jumblejunkie on September 05, 2014, 07:59:57 am If its full of games, 225 is a great price IMO even if the monitors are out. Plenty of Sanyo guys here to help you. When I try to fix Sanyos, I make them worse :(
Title: Re: PC 10 duel monitor Post by: Antman on September 06, 2014, 12:50:34 pm Well I got the machine and I think I got a good score!
I do believe it just needs a cap kit x2 The pcb seams to get power and lights on the board illuminate Checked the power supply and all voltages are working I checked the voltage to the monitor and it's getting the 100v it wants so it must be cap kits I guess the sound boards are in with the monitor board area Both have no sound or signs of life from the monitor I ordered 2x deluxe cap kits and 2 "hot" from bob Roberts ! The cab was. FILTHY FILTHY FILTHY !! Slight screen burn in the top monitor that I didn't even see until I took of the glass to clean it The cab has the light gun and holster ! Packed full of games King fu Rygar Contra 1942 Golf Hogans ally Mario bros Super mario bros And 2 others I forget He also gave me 4 big case like boxes for Nintendo vs The case has a marque , glass for marque, license sticker, and game chips 4 cases. Can these be used in the PC 10? Or is it a vs only? THINK I SCORED GOOD! Title: Re: PC 10 duel monitor Post by: Antman on September 10, 2014, 07:55:14 pm Two dead monitors
Took the top one out tested and removed the chassis Not getting any b+ reading on ether monitor Ordered new cap kit and flyback for both just to have them And new hots for both. Both hots currently check good. No neck glow no sound fuse is good. Diaods 401-404 check good I think What else should I check for a dead board? All caps look normal , no explodes or anything noticeable No cold solder I can find. Continuity of traces check good Any help is appreciated! And thanks ! Title: Re: PC 10 duel monitor Post by: Antman on September 14, 2014, 11:37:26 pm Rush and attack
Double dribble are the other 2 games Found a bad trace on the bottom monitor Jumper installed and monitor is great ! The top monitor got a cap kit installed already but I found a ceramic resistor blown and am waiting for it to arrive as radio hack did not stock the 7w 1.5 ohm or acceptable I believe after I replace it the top monitor will be good ! I bought a cap kit delux, flyback,HOT.voltage reg,and filter cap for both but only fixed the trace on the bottom monitor to fire it up! |