|
Title: Atari Cocktail Cab rebuild project Post by: RiceCube on August 27, 2014, 09:05:41 pm I Have an Atari Cocktail table that has very little working on it. The coin-op lights up and I had sound once but it was an opening and skipped to a two second loop. I have no idea what it is or what it used to be. I have no monitor glow or glow in the tube. I have checked the power supply and I have 5v and 12v coming off it. I do not know much about the Isolation transformer and even though it looks like hell I believe it is functioning properly. I also checked all fuses through the board cleaned and checked connections and all were fine.The table is weathered and dirty but all wiring and boards are fairly clean for sitting so long. I have built my own MAME machines but this is my first authentic rebuild of a machine. I would like to keep close to original as possible besides the obvious cosmetics. It is an Atari table that is strange because I cannot find anything on the model number or serial. The board inside has a model number but I also can find nothing on it. Because I have no idea what is in it I cannot even look up the pinouts. The table had to of been altered. I have never seen the control layout before and it is different for each player. If anyone has info on this game or where to go next I would be more tan happy to take that advice. I am going to leave the model numbers if anyone wants to take a crack at this.
Table Model# 298-01 Table Serial# 1144 PCB Model# 2309 Since I can't get my pics to work right now here is a link to my Flickr page with all pics https://www.flickr.com/photos/127263296@N03/?savedsettings=15055640641#photo15055640641 Title: Re: Atari Cocktail Cab rebuild project Post by: RiceCube on August 27, 2014, 09:31:06 pm my photos wont work I need to use something other than flickr i guess
Title: Re: Atari Cocktail Cab rebuild project Post by: VertexGuy on August 28, 2014, 01:35:16 am whats the button layout?
is it an asteroids? Title: Re: Atari Cocktail Cab rebuild project Post by: RiceCube on August 28, 2014, 01:52:53 am it is what I thought it was but it has analog sticks and four buttons
https://www.flickr.com/photos/127263296@N03/?savedsettings=15055640641#photo15055640641 Title: Re: Atari Cocktail Cab rebuild project Post by: RiceCube on August 28, 2014, 09:05:15 pm Does my link not work? or is there no one that knows what my next step is?
Title: Re: Atari Cocktail Cab rebuild project Post by: VertexGuy on August 31, 2014, 01:27:05 am it is what I thought it was but it has analog sticks and four buttons https://www.flickr.com/photos/127263296@N03/?savedsettings=15055640641#photo15055640641 It looks like somebody replaced the fire button on the asteroids with a stick, then added 2 more buttons. Title: Re: Atari Cocktail Cab rebuild project Post by: RiceCube on August 31, 2014, 10:10:57 am That is what I thought. But does anyone know if the plug and outlet leading to the power supply is normal or not? I have never seen this before in a cab and the the wiring is confusing the hell out of me. Started taking apart the monitor chassis last night and found a busted fuse on the end of the picture tube. there are three on the end of the tube. Would this stop any power from getting to the monitor or would this fuse control a certain colour?
Title: Re: Atari Cocktail Cab rebuild project Post by: RiceCube on September 08, 2014, 08:47:41 am well I gave it a try but I guess no one here can help me out so I will turn it into a Mame table
Title: Re: Atari Cocktail Cab rebuild project Post by: VertexGuy on September 08, 2014, 09:09:24 am get the board running and see what it is
Title: Re: Atari Cocktail Cab rebuild project Post by: RiceCube on September 10, 2014, 08:34:45 am I cannot get it running I have no idea what the pin-outs even are for it> i am going to save all the guts for another project after I have learned a bit more.
Title: Re: Atari Cocktail Cab rebuild project Post by: VertexGuy on September 10, 2014, 07:51:22 pm lets see a pic of this board
Title: Re: Atari Cocktail Cab rebuild project Post by: RiceCube on September 10, 2014, 08:03:15 pm I posted the pics in a link at the top. https://www.flickr.com/photos/127263296@N03/?savedsettings=15055640641#photo15055640641
That is the link again. There are two good pics of each board. I had them taken apart when I was examining them. I also posted serial and model numbers at the top of the page too Title: Re: Atari Cocktail Cab rebuild project Post by: VertexGuy on September 10, 2014, 08:09:33 pm is the board marked Atari any where on it?
Title: Re: Atari Cocktail Cab rebuild project Post by: VertexGuy on September 10, 2014, 08:25:57 pm its a ghost and goblins pcb
Title: Re: Atari Cocktail Cab rebuild project Post by: RiceCube on September 10, 2014, 10:55:42 pm How do you know this for sure?
Title: Re: Atari Cocktail Cab rebuild project Post by: VertexGuy on September 11, 2014, 09:30:23 am try the pinouts for ghost and goblins. this board may also be a bootleg.
ask and you shall receive . http://www.ukvac.com/forum/ghosts-n-goblins-bootleg-help_topic329730.html |