|
Title: hello all, and help with a project idea, as well as guidance Post by: sed8ted on August 26, 2014, 12:30:05 pm To start off,
I love your videos, I watch them and have helped a local bowling alley with repairing his games with what I have learned from you and your videos. I have built up a mame machine, from a doner cab that I got from the bowling alley as payment for a job I did. Now I am embarking on a new project, Taking a Neo Geo MVS board and making it a home console. I have the following items, Neo MVS Slot MV-1F SNK Mother board Arcade Jamma Neo Geo black RGB to NTSC/PAL TV Converter PCB Remove CODE: CV-04 http://www.jammaboards.com/store/index.php?subcats=Y&status=A&pshort=Y&pfull=Y&pname=Y&pkeywords=Y&search_performed=Y&cid=0&q=CV-04&x=0&y=0&dispatch=products.search JAMMA Full Cabinet Wiring Harness Loom - New Style JAMMA Full Cabinet Wiring Harness Loom - Multigame Compatible! Remove CODE: JAMMA-H1 http://www.jammaboards.com/store/?subcats=Y&status=A&pshort=Y&pfull=Y&pname=Y&pkeywords=Y&search_performed=Y&cid=0&q=JAMMA-H1&x=0&y=0&dispatch=products.search Power Switch with Built-in EMI Filter and Fuse Protection Remove CODE: EMI-PF06G http://www.jammaboards.com/store/?subcats=Y&status=A&pshort=Y&pfull=Y&pname=Y&pkeywords=Y&search_performed=Y&cid=0&q=EMI-PF06G&x=0&y=0&dispatch=products.search 16A Arcade Game Switching Power Supply (MD-9916A) 16A Arcade Game Switching Power Supply w/ -5VDC (MD-9916A) Remove CODE: MD-9916A-5VDC http://www.jammaboards.com/store/?subcats=Y&status=A&pshort=Y&pfull=Y&pname=Y&pkeywords=Y&search_performed=Y&cid=0&q=MD-9916A-5VDC&x=0&y=0&dispatch=products.search I also have the parts to make a controller. My question is, as follows On the power supply, there is a ac1 and ac2 as well as FG. I know the FG is the ground, but the ac1 and the ac2 is throwing me off, as I need to wire this to the power switch and rather not reverse the plugs. Also for the RGB to RCA converter board requries power, is it possible to splice into the -5v/1a? And I was going to make this out of cherry wood, and was going to use the +12v for pc fans to help push air through and keep the unit cool. The jamma harness is easy enough to follow and hook up, Any help would be greatly appreciated. Thanks Andy Title: Re: hello all, and help with a project idea, as well as guidance Post by: lordkahless214 on August 26, 2014, 05:43:00 pm AC1 and AC2 are the 120v wires from your wall socket.
Typically AC1 is your Black or HOT wire, and AC2 is your White or neutral wire Bob Roberts has a wonderful writeup on this http://arcadecontrols.com/BBBB/acwiring.html (http://arcadecontrols.com/BBBB/acwiring.html) usually the power switch will be hooked into the black or HOT wire from your power cord. Just one safety warning here: make sure you read up on AC wiring in detail, this can either damage your parts, or kill you if done wrong. Title: Re: hello all, and help with a project idea, as well as guidance Post by: VertexGuy on September 15, 2014, 11:29:47 pm Its usually the black wire.
from the factory. |