|
Title: I have a couple questions about some K7000s Post by: Rayoshi on July 30, 2014, 08:06:26 pm OK I have 2 K7000 chassis one kinda works and the other blows fuses. The one that works Is really dim so i figure a cap kit and prolly a flyback will fix this on right up. I just want to know is this on is a medium res k7000 or not. and is there a special cap kit or flyback for this chassis?
working chassis http://imgur.com/a/1HxKv The other I bought off ebay as untested there was a trace that lifted so i put the blue jumper wire in. But there are a couple things on the solder side of the board that im not sure are factory. Non working chassis http://imgur.com/a/zCOuc Title: Re: I have a couple questions about some K7000s Post by: iankellogg on August 01, 2014, 07:13:55 am I have been trying to do as much research as I can and thanks to a lot of buffett's posts I think I understand now.
The Medium res K7000 is basically the same PCB as the standard res. This means the flyback and capkits are the same. |