John's Arcade Forum - Classic Arcade and Pinball Collecting and Restoring Discussion Forum - RETRO MAME - Nintendo Vs Forum

Tech and Marketplace => I need help with my game! - Technical Discussion => Topic started by: Jones711 on July 23, 2014, 09:55:02 am



Title: Double Dragon
Post by: Jones711 on July 23, 2014, 09:55:02 am
Hey guys I'm new to the arcade scene and recently picked up a Double Dragon arcade from a local vendor looking to downsize. I originally bought the cabinet under the assumption it was in non working condition, after using the adjusting knobs on the monitor to do some fine tuning I was able to get the picture to show but still not anywhere near where it should be (kind of blue and grainy). My lack of knowledge and research points me toward a cap kit and that might be all it takes to take care of the issue, unfortunately I have no idea what monitor I have and what cap kit to buy. Any help would be appreciated, can add pictures later today when I arrive home. Thanks


Title: Re: Double Dragon
Post by: alby13 on July 30, 2014, 01:24:36 am
Hey guys I'm new to the arcade scene and recently picked up a Double Dragon arcade from a local vendor looking to downsize. I originally bought the cabinet under the assumption it was in non working condition, after using the adjusting knobs on the monitor to do some fine tuning I was able to get the picture to show but still not anywhere near where it should be (kind of blue and grainy). My lack of knowledge and research points me toward a cap kit and that might be all it takes to take care of the issue, unfortunately I have no idea what monitor I have and what cap kit to buy. Any help would be appreciated, can add pictures later today when I arrive home. Thanks

i thought i replied to this thread. hmm. at any rate, there is a restorer on youtube who restored one that can answer your question if it is all original. if all the adjustments can't get the picture right, then a cap kit is the next step. please update us with pictures.


Title: Re:
Post by: darkcat1 on August 05, 2014, 05:48:00 am
Pictures might help I'd it


Title: Re: Double Dragon
Post by: Jones711 on August 05, 2014, 01:03:31 pm
Here is a link to a picture of the monitor i have as well as what the picture currently looks like. Thanks for all the help!
http://imgur.com/a/yizvE (http://imgur.com/a/yizvE)


Title: Re: Double Dragon
Post by: alby13 on August 05, 2014, 06:38:02 pm
hmm the pictures are not loading on that site for me


Title: Re: Double Dragon
Post by: VertexGuy on August 05, 2014, 09:22:10 pm
Check that neck board too while you are at it.


Title: Re: Double Dragon
Post by: alby13 on August 06, 2014, 06:42:50 am
Maybe you can compare this monitor with the original pictures

It looks like the capacitors went bad. Maybe look and see if they look bad

You can look at the types of caps in the kit for the original monitor cap kit and see if they match?

Arcademuseum.com check that out