|
Title: Donkey Kong Jr: Replace Marque Light 100v v 120v? Post by: Tarantulas on June 04, 2014, 08:08:36 pm The DK:JR cabinet I recently picked up is missing the original fluorescent fixture in the marque. Is is possible to install an appropriately sized 120v fluorescent fixture and just run it at 100v?
Would it even turn on? If it turned on, would there be any sort risks (fire comes to mind)? If this isn't the way to go, what would be the best bet? Installing an internal power strip and running the new fixture off and the DK:JR cabinet's regular 100V stepdown transformer / PSU from there? I've got no issues with using an original fixture if you can still buy them somewhere at a reasonable price. Thanks, experts! Title: Re: Donkey Kong Jr: Replace Marque Light 100v v 120v? Post by: lordkahless214 on June 04, 2014, 08:20:21 pm well I can say that some fixtures will work, I believe wal-mart has one that will run on 100v and that one you could plug directly into the 100v socket on the bottom just like the original one would have been.
In the case of my Donkey Kong I had nothing but problems doing that, more buzz in the speaker and light that took forever to start, never had a fire or anything but i didn't like the performance so I just wired it into the labeled 120V screw terminals at the bottom of the cabinet, so you could do that too How well it will work in the 100v plug is tied to what fixture you use. Title: Re: Donkey Kong Jr: Replace Marque Light 100v v 120v? Post by: iankellogg on June 05, 2014, 07:46:59 am while some fixtures might work, it may make a lot of audio noise. I had a shitty DK jr that had a light socket that i put a CFL in that worked fine at 100V. if you are willing to contact people on Klov i have seen people selling the original fixture if you want that.
Title: Re: Donkey Kong Jr: Replace Marque Light 100v v 120v? Post by: John's Arcade on June 05, 2014, 08:15:47 am The DK:JR cabinet I recently picked up is missing the original fluorescent fixture in the marque. Is is possible to install an appropriately sized 120v fluorescent fixture and just run it at 100v? Would it even turn on? If it turned on, would there be any sort risks (fire comes to mind)? If this isn't the way to go, what would be the best bet? Installing an internal power strip and running the new fixture off and the DK:JR cabinet's regular 100V stepdown transformer / PSU from there? I've got no issues with using an original fixture if you can still buy them somewhere at a reasonable price. Thanks, experts! You can use the Wal-Mart Made in USA 18" light fixture in the Nintendo cabinet with no issues. If your original is missing it's a suitable replacement and a good fixture for arcade cabinets. It's cheap too! Title: Re: Donkey Kong Jr: Replace Marque Light 100v v 120v? Post by: computerfixerguy on June 05, 2014, 06:01:47 pm I think you are over complicating it. Go pick up the cheap fluorescent fixture from wal-mart. I got several of them when they were on sale for 7 dollars each last month. Cut the plug off and screw it into the 120v terminals, done.
Title: Re: Donkey Kong Jr: Replace Marque Light 100v v 120v? Post by: John's Arcade on June 05, 2014, 06:34:38 pm I think you are over complicating it. Go pick up the cheap fluorescent fixture from wal-mart. I got several of them when they were on sale for 7 dollars each last month. Cut the plug off and screw it into the 120v terminals, done. I said that. :) Title: Re: Donkey Kong Jr: Replace Marque Light 100v v 120v? Post by: Tarantulas on June 05, 2014, 07:08:41 pm ;D
Title: Re: Donkey Kong Jr: Replace Marque Light 100v v 120v? Post by: VertexGuy on June 05, 2014, 07:47:37 pm The DK:JR cabinet I recently picked up is missing the original fluorescent fixture in the marque. Is is possible to install an appropriately sized 120v fluorescent fixture and just run it at 100v? Would it even turn on? If it turned on, would there be any sort risks (fire comes to mind)? If this isn't the way to go, what would be the best bet? Installing an internal power strip and running the new fixture off and the DK:JR cabinet's regular 100V stepdown transformer / PSU from there? I've got no issues with using an original fixture if you can still buy them somewhere at a reasonable price. Thanks, experts! screw the original fixture,, wait til you have to buy the bulb for that lol.. One place I went to wanted 30 bux just for the bulb. Title: Re: Donkey Kong Jr: Replace Marque Light 100v v 120v? Post by: John's Arcade on June 05, 2014, 10:32:54 pm The DK:JR cabinet I recently picked up is missing the original fluorescent fixture in the marque. Is is possible to install an appropriately sized 120v fluorescent fixture and just run it at 100v? Would it even turn on? If it turned on, would there be any sort risks (fire comes to mind)? If this isn't the way to go, what would be the best bet? Installing an internal power strip and running the new fixture off and the DK:JR cabinet's regular 100V stepdown transformer / PSU from there? I've got no issues with using an original fixture if you can still buy them somewhere at a reasonable price. Thanks, experts! screw the original fixture,, wait til you have to buy the bulb for that lol.. One place I went to wanted 30 bux just for the bulb. Bulbs are cheap online. I have a box of 20 of them. Title: Re: Donkey Kong Jr: Replace Marque Light 100v v 120v? Post by: jumblejunkie on July 08, 2014, 10:12:23 am All my Nintendo cabs have a new 10 dollar 120v light fixture from Lowe's. Works fine.
Title: Re: Donkey Kong Jr: Replace Marque Light 100v v 120v? Post by: darkcat1 on July 17, 2014, 10:25:23 am I reinstalled an original in my PC10 and found the bulb and the starter online but I'm just obsessive that way. There's an old thread over on the klov forms if you can find it for this
|